Rear View Ai Pedestrian Detection Smart Warning Ahd Car Bsd Camera

• Customization: Available
• After-sales Service: 18 Months
• Warranty: 18 Months
• Model NO.: MS-753XM
• Applicable Model: Car, SUV, Truck, Agricultural Vehicles, Engineering Vehicles, Sightseeing Car, RV, Forklift, Harvester, Corn Machine
• Shell Material: Aluminium
• Probe Number: 1
• Display Type: Reverse Image
• Interface: Air Plug
• Function: Night Vision, Waterproof, Dustproof, Shockproof
• Definition: 720p
• Chip: CMOS
• Waterproof Grade: IP68
• Alarming Distance: 2.5-0.35m
• Probe Diameter: 18.8mm
• Resolution: 1920*1080
• Transport Package: Carton
• Specification: 51*41*41
• Trademark: MINGSHANG
• Origin: China
• HS Code: 8528591090
• Production Capacity: 500000PCS/Year
• Package Size: 20.00cm * 18.00cm * 15.00cm
• Package Gross Weight: 0.500kg

Product Description

AI Intelligent BSD Camera

Product Features
1)Pedestrian and vehicle detection can identify various types of pedestrians and  vehicles such as cyclists,electric scooters,and hikers,providing pedestrian and vehicle detection and warning functions.
2)Warning function,high-definition 720P and 1080P video output (stacked with pedestrianand vehicle tracking and alarm identification boxes), inside the ruler line is red, outside the ruler line is yellow.
3)Warning  audio  output,can  be  connected  to  a  monitor  or  other  speaker equipped devices for broadcasting.
4)The alarm sound 'beep beep' will emit long and short 'beep beep beep' sounds based on entering the warning recognition area.
5)Alarm IO line linkage sound and light alarm:When pedestrians and vehicles enter the alarm area,an alarm audio beep will be emitted,and the alarm IO output high level can trigger an external sound and light alarm

 Detailed Parameters

PROJECT	Technical parameters(1080P)
System Format	PAL/NTSC(optional)
Effective Pixels	1920(H)X1080(V)
Wide Dynamic	Support digital wide dynamic
Infrared Fill Light	Night vision more than 10meters
Minimum illumination	0.01Lux@(F1.2,AGC ON),0LUX with IR
Shutter	AUTO
Frequency	1080P@25fps/1080P@30fps
Synchronous Mode	Internal synchronization
Video Output	1Vp-p,75 ohms
Dynamic Range	74db
Detection Distance	0.5-20M
Angle	120°(D)102°(H)55°(V)
Working Voltage	9-15V
Working Current	Infrared activation approximately 165mA/DC12V
Waterproof Level	IP 67
Alarm in	Supported, can be linked with sound and light alarms for alarm
Audio Frequency	Warning audio "beep beep beep" will emit long and short sounds based on distance
Mirror Function	Supported
Reverse Line	Supported
Operation Temperature	-30ºC-+70ºC,maximum humidity of 95%
Seismic Grade	6G

 

1. Camera Installation

1. The camera is located in the vehicles position,and can be installed when the display can show the driver's desired field of view.
2. The base of the camera has strong adhesion to magnetic materials,and can be successfully installed by fitting the base to the vehicle.
3. The recommended installation height for the camera is within the range  of 1.0~1.6m. It is recommended to configure a assisting staff to adjust the position of the device in the car,and the driver should sit in the driver's  seat to observe thedisplay,in order to determine whether the visible range of the device has covered the blind spot of  the car.
4. The rearview camera is installed in the rear position of the vehicle, as shown in the following figure.The farthest detection distance of the rear view camera can reach 12m.