1080P Adas+Dsm Dash Camera

• Customization: Available
• After-sales Service: 18 Months
• Warranty: 18 Months
• Model NO.: MS-M08
• Applicable Model: Car, SUV, Truck, Agricultural Vehicles, Engineering Vehicles, Sightseeing Car, RV, Forklift, Harvester, Corn Machine
• Shell Material: ABS Plastic
• Probe Number: 2
• Display Type: LCD Matrix
• Interface: RCA
• Function: Night Vision, with Gauge, Waterproof, Dustproof, Shockproof
• Definition: 1080P
• Chip: CMOS
• Waterproof Grade: IP66
• Alarming Distance: 2.0-0.2m
• Probe Diameter: 18.8mm
• Transport Package: Carton
• Specification: 51*41*41
• Trademark: MINGSHANG
• Origin: China
• HS Code: 8528591090
• Production Capacity: 500000PCS/Year
• Package Size: 20.00cm * 18.00cm * 15.00cm
• Package Gross Weight: 1.000kg

Product Description

1080P ADAS+DSM Dash Camera 



Features:

1. Front high-definition 1080P cameras and Rear 720P cameras, plus extended 1-channel 720P cameras, simultaneous recording inside and outside the car; 
2. Infrared night vision, the video is clearly visible in the dark environment in the car;
3. Support  TF card recording, support 32G/64G/128G/256G/512G high speed ;
4. Special file system, loop recording, to ensure the safety and stability of video files;
5. Built-in super capacitor, when the device is abnormally powered off, it can work continuously for 3 seconds and complete the video file;
6. 4G Full Netcom, supports global frequency bands;
7. BD/GPS Dual-mode positioning, AGPS positioning and other positioning methods, support driving track playback;
8. One-click picture capture, automatic picture upload platform;
9. One-click SOS emergency alarm, video upload before and after alarm;
10. Support multiple alarm types: low pressure alarm, overspeed alarm, parking overtime alarm, fatigue driving alarm, SOS alarm, collision alarm, video occlusion alarm, etc.;
11. Support platform real-time monitoring, monitoring, intercom, track playback, remote capture, remote playback and other functions;
12. Support multiple network protocol platforms,CMSV6,JT/T 794-2011,JT/T 808-2011,JT/T 1078 ,JT/T 905.2-2014,GB28181 etc;
13. Equipment automatic detection function, active discovery of equipment failures, easy operation and maintenance;
14. Support driver face recognition (optional);

Support advanced driver assistance system (ADAS) (optional): lane deviation alarm, forward collision alarm, and vehicle distance too close alarm;
Driver Behavior Analysis (DSM) (optional): lower your head, call, smoke, look around, yawn, close your eyes, face not detected, cover camera, etc.

Product parameter: 

Basic configuration
CPU	ARM Cortex-A7 1.0GHZ
Memory	2GB
Outside camera	2MP sensor,95 Degree.F4.3 Support wide dynamic WDR
In-car camera	1MP sensor,135 Degree Wide angle.F2.8 With infrared night vision, the video is clearly visible in the dark environment in the car
Dual memory card	Support TF cards,32GB/64GB/128G/256G
Positioning	Beidou/GPS dual-mode high-precision positioning module
Gyro	Collision alarm, vibration alarm
Speaker and Mic	Build in
ADAS algorithm (optional)	Advanced driving assistance system: lane deviation alarm, forward collision alarm, and vehicle distance too close alarm
DSM algorithm + DSM camera (optional)	Driver behavior analysis: head down, call, smoke, look around, yawn, close eyes, no face detected, cover the camera
Face recognition algorithm (optional)	Identify the driver and report
Recording parameters
Video resolution	1080P/720P/D1
Video format	H264 Compression format
file format	Special file system, can export asf file
Network parameters
4G	All domestic Netcom supports China Mobile, China Unicom, telecommunications cards, and IoT cards; Overseas support for global frequency bands;
WIFI	2.4G frequency, support WIFI STA/AP mode, support mobile preview
External Interface
VCC	powered by 9V-36V
GND	Ground
ACC	Ignition detection, control switch
SOS button	Emergency button, video upload
External display(optional)	CVBS Interface, video output
Serial port	1xRS232, support extended functions
external cameras	1xAHD interface camera
One-key restore settings	Support one-key factory reset function
structure
volume(mm)	120*77*55mm
weight	Around 240g±10g
working environment
Operating temperature	-20ºC~+70ºC
Relative humidity	≤93%

 Introduction

Mingshang was established in 2003 in Shenzhen, moved to Huizhou in 2017, and in the same year,Mingshang Research Institute and High-Tech Commercial Vehicle Incubation Base were set up. The company has established national laboratories and built an up-down stream automotive electronics incubation base to provide standard solutions for digitalization, intelligence and informationization of global commercial vehicles.

Service
Focusing on the commercial vehicle industry, with smart cabin as the core, the company is an integrator of hardware and software system including driving safety, vehicle management, intelligent driving, and intelligent network. Our products are based on video security collection, storage, monitoring, connecting cloud and data computing products, commercial vehicles with special thermal  imaging dual light fusion night vision system, intelligent cockpit display, multi-way 360 panoramic system for blind zone, etc. Based on the combination of hardware product sets, we provide personalized technical bases for  commercial vehicle intelligence, informationization, digitalization and and networking, and to build a commercial vehicle networking  operation service platform integrated with high-quality software and hardware system.

Core technology
The company focuses on the core technology of intelligent driving software and hardware platform of  commercial vehicle,integrates the advantageous products of the world's cutting-edge partners, with  varieties and small-volume output and the company has potentially become leader in the whole market  segment.MINGSHANG shareholders: ArcSoft, Horizon Robotics, PATEO, ZIJIN MINING, Shenzhen Smart City, etc.

Qualifications
·National High-tech Enterprise Certificate
·National High-tech Product Certificate
·National Safety Technology Center CCC Product Certificate
·Certificate of ISO9001/IATF16949 Quality Management System
·Passed ISO14001:2015 Environmental Management System Certificate
·Passed ISO45001:2018 Profession Health and Safety Management System Certificate
·Passed CMMI Level 3 Software Capability Maturity Integration Model Certificate